Make your PDC 2008 USB HDD bootable Windows 7 install disk

If you’ve received the ultra-cool PDC2008 160GB portable hard drive with “the goods” then, here’re the steps to to make the disk a bootable Windows 7 install disk without even deleting any of the existing files on the drive since there’s about 90GB free of the 160GB drive. This is especially handy if you’re trying to install Windows 7 on a device without […]

If you’ve received the ultra-cool PDC2008 160GB portable hard drive with “the goods” then, here’re the steps to to make the disk a bootable Windows 7 install disk without even deleting any of the existing files on the drive since there’s about 90GB free of the 160GB drive.

This is especially handy if you’re trying to install Windows 7 on a device without a DVD drive or if you don’t have any blank DVDs to burn the ISO on. Of course this guide also works if you have an existing portable USB hard drive that has enough free space to partition and a copy of a Windows 7 ISO.

  1. Click open the Start Menu, right click on “Computer”, “Manage”. Open the “Disk Management” tool.
  2. Find the USB hard drive, should be 149.05GB. Right click on the volume and click “Shrink volume”. Shrink the volume by 10000MB.
  3. Right click on the new unallocated volume, “New Simple Volume”, format as “FAT32&Prime. Check “Perform quick format” unless you have time to waste.
  4. Right click on the new volume, “Mark Partition as Active”.
  5. Mount the Windows 7 ISO from the USB (\Windows7\ISO\6801.0.080913-2030_Client_en-us_ULTIMATE-ULTIMATE_GB1CFRE_EN_DVD.iso) using your favorite ISO tool (I use Daemon Tools Lite).
  6. Copy the entire DVD directory into your newly created volume.
  7. Now take your USB drive and tell the PC to boot from USB. The Windows 7 setup should appear.

    To restore your USB drive to the previous state and reclaim the 10GB of space, simply delete the new volume created and extend the original volume to consume the entire 10000MB now unallocated